Applications :

• The unarmoured fire resistant versions (Part 1 Type 1) are typically used in chemical and process industries where there is danger of fire.

Construction :

• Conductor	Annealed or tinned copper, Class 2
  Insulation	Mica glass tape, XLPE (Cross Linked Polyethylene), or PE (optional)
  Pairing	Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
  Colour code	See technical information
  Binder tape	PETP transparent tape
  Collective screen	Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
  Outer sheath	LSOH(Low Smoke Zero Halogen) sheath
  	Flame retardant to IEC60332-3-22
  	Fire resistant to IEC60331
  	Halogen free to IEC60754-1
  	Low smoke emission to IEC61034-1-2
  Sheath colour	Black or blue

Mechanical and Electrical Properties :

• Operating temperature : -20˚C up to + 90˚C( fixed installation) ; 0˚C to +50˚C(during operation ).
• Minimum bending radius : 5 x overall diameter.

• Conductor Area Size		mm2	0.5	0.75	1.0	1.5
  Conductor Stranding		No. x mm	7 x 0.3	7 x 0.37	7 x 0.44	7 x 0.53
  Conductor resistance max		ohm/km	36	24.5	18.1	12.1
  Insulation resistance min		Gohm/km	5	5	5	5
  Capacitance unbalance at 1 kHz(pair to pair screen)		pF/250m	250
  Max. Mutual Capacitance @ 1 kHz forNon OS or OS cables (except one-pair and two-pairs)		pF/m	115	115	115	115
  Max. Mutual Capacitance @ 1 kHz IS/OS cables (include 1 pair and 2 pair)		pF/m	75	75	75	75
  Max. L/R Ratio for adjacent cores(Inductance/ Resistance)		μH/ohm	25	25	25	40
  Test voltage	Core to core	V	1000	1000	1000	1000
  	Core to screen	V	1000	1000	1000	1000
  Rated voltage max		V	300/500	300/500	300/500	300/500

Parameter :

• No.of Pairs	No.and Dia. of Wires	Nominal Conductor Cross Sectional Area	Nominal Thickness of Insulation	Nominal Thickness of Sheath	Nominal Dia. of Cable	Approx.Weight
  	no./mm	mm2	mm	mm	mm	kg/km
  1	7/0.44	1	0.6	1.4	7.8	89
  2	7/0.44	1	0.6	1.4	9.2	121
  5	7/0.44	1	0.6	1.4	13.9	298